How to Invert Rotations for Bender Communication
Written by Michael Cone
Updated at January 27th, 2026
VTube considers rotations to be positive in the CCW direction. Some benders handle Positive rotations as a Clockwise motion, so you will probably need to enter "YES" for these options (so that the rotations are not corrected in the wrong direction).
| MASTER tube LRA |  |
| Go to Bender Setup and SEND the Master XYZ + BLUE Columns to see which direction the rotations are being sent |
  |
| Open the 'Other Info' path and find the .S2B file. Open that file and view the $mlra file. The number after $mlra is the number of bends, so this will change per project. |
|
| If you need to invert the rotations, go to Configure Benderlink Protocols |
|
| Find the bender you need to have inverted rotations for and change the CW Rotations Positive at Import and Export from NO to YES |
|
| Next time you send data to that bender, the rotations will be inverted from the MASTER |  |