Advanced Tubular Technologies Navigate to the main website

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact us here if you need more help.
English (US)
PT Portuguese
US English (US)
  • Home
  • VTube Technical Articles
  • VTube Communications

List of Benders for VTube-LASER Bender Communications

Written by Michael Cone

Updated at October 1st, 2026

Article Link Copied!

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • VTube Update Articles
  • VTube Technical Articles
    VTube General (STEP and LASER) VTube Reports VTube-LASER VTube Configuration and Maintenance VTube-STEP VTube Installation SOLIDWORKS Configuration VTube Cloud License Server VTube Communications
  • Downloadable Resources
  • VTube Videos
  • Measuring Devices
    HEXAGON Articulated Arms Metronor
  • Utility Software
  • Partners
  • Benderlink Hardware
  • Bending Terminology
  • Benderlink Software
  • Benderlink Update Articles
  • CNC Bender ProControl
  • Bender to XYZ
  • General Software Topics
  • Windows Technical Articles
    Cable Specs
  • TubeCAD
  • FIF Translator Updates
+ More

VTube-LASER can communicate with these benders.

  • The protocol for each bender is listed in the details column.
  • Many manufacturers consider communication a purchased option.

 

Manufacturer Details
AddisonMckee Control: Mark IV or higher
Protocol: Supravision Network - See this page for more information.
Connection: Standard Ethernet
Special Hardware: None
Charges: Contact the manufacturer
AIM Wire Benders Control: AIM
Protocol: AIM Supravision Network - See this page for a video.
Connection: Standard Ethernet
Special Hardware: None
Charges: SmartEditor® CMM connection option, $9,980 per bender
Alpine Control: Alpine
Protocol: DAF File Data Transfer for new parts; Supravision Network for bidirectional bender correction (Master Convert license)
Connection: Standard Ethernet
Special Hardware: None
Charges: Contact UTE (423.282.0404)
AMOB Control: AMOB
Protocol: VTL Data File Transfer for new parts and unidirectional corrections
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown; contact AMOB
BLM Group Control: VGP-3D
Protocol: Supravision Network - See this page for more information.
Connection: Ethernet
Special Hardware: None
Charges: About $5,000 per bender (BLM part no. SW0453)
Chiyoda Control: Chiyoda or KEINS
Protocol: Proprietary Benderlink for Chiyoda and KEINS RS232
Connection: Proprietary serial from Chiyoda
Special Hardware: Custom serial cable
Charges: Requires Benderlink for Chiyoda and KEINS software
CMP Automation Control: CMP MCS (Machine Control Software)
Protocol: CMP Supravision Network via FTP
Special Hardware: None
Charges: Unknown
COMCO Control: COMCO (Windows-based)
Protocol: VTube-LASER modifies CSV files exported/imported by the COMCO control
Connection: Standard Ethernet
Special Hardware: Network only
Charges: None
CRIPPA Control: CRIPPA
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Notes: See VTube-LASER to CRIPPA
CSM Control: CSM
Protocol: CSM File Data Transfer
Connection: Standard Ethernet
Special Hardware: None
Charges: None
DENGLER Control: Dengler
Protocol: MES files for corrections
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Eaton Leonard – Premier Control: Premier
Protocol: Eaton Leonard Legacy Serial Current Loop
Connection: Network and serial cables
Charges: Benderlink module from Advanced Tubular
Notes: See Benderlink Ethernet Modules for Eaton Leonard
Eaton Leonard – Lightspeed Control: Lightspeed
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Flecte Control: BendPro (when purchased from RbSA, rbsaindustrial.com)
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
HAN JIE Control: Han Jie
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Check with SMT Industries, Sidney, Ohio
HERBER Control: HERBER
Protocol: HERBER MES+SOL
Connection: Standard Ethernet
Special Hardware: None
Notes: Tested and confirmed by HERBER technicians
Horn Machine Tools (HMT) Control: CurrentTech BendPro
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Yes; contact HORN
KEINS Control: KEINS MQ85 Touchscreen
Protocol: Proprietary Benderlink for Chiyoda and KEINS RS232
Connection: Proprietary serial from KEINS
Special Hardware: Custom serial cable
Charges: Requires Benderlink for Chiyoda and KEINS software
MachMotion Control: MachMotion
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: $2,000 per bender to enable protocol
MiiC Control: MiiC
Protocol: Proprietary MiiC BSC via Benderlink for MiiC
Connection: Network and serial cables
Special Hardware: Benderlink Ethernet Module at each bender
Charges: Requires Benderlink for MiiC software; MiiC on-site firmware change (extra charge)
Morris Solutions Control: Morris Solutions
Protocol: Supravision Network FTP
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Notes: VTube distributors in Benelux
PINES Technology Control: TS-2000
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Per-bender charge; check with PINES
NUMALLIANCE Control: NUMALLIANCE
Protocol: NUMALLIANCE CSV files
Connection: Standard Ethernet or thumb drive
Special Hardware: None
Charges: Charge to enable corrections; check with NUMALLIANCE
SMI Control: Silver 3
Protocol: SMI Data File Transfer
Connection: Standard Ethernet
Special Hardware: None
Charges: None
SMT Industries Control: Advanced Tubular CNC Bender ProControl v12
Protocol: Supravision Network (see Benderlink for CNC Bender ProControl)
Connection: Standard Ethernet
Special Hardware: None
Charges: Charge for option; check with SMT
SOCO Machinery Control: SOCO Control
Protocol: SOCO SVNet (see VTube Communication with SOCO)
Connection: Standard Ethernet
Special Hardware: None
Charges: None
STARBEND Control: STARBEND Control
US Distributor: ITEC
Protocol: Imports Supravision files
Connection: Standard Ethernet
Special Hardware: None
Charges: None
Techno Industrial Machinery Control: CurrentTech BendPro
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: $1,500 per bender (through CurrentTech)
Transfluid Control: Transfluid T control
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Tulip/Roboflex Control: Tulip/Roboflex
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Tube-Line Technologies Control: CurrentTech BendPro
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: Yes; contact Tube-Line
Unison Limited Control: Unison
Protocol: Supravision Network
Connection: Standard Ethernet
Special Hardware: None
Charges: None (confirmed with Unison)
UTE – Universal Tool & Engineering Control: BendPro and Alpine
Protocol: BendPro: Supravision Network. Alpine: DAF File Data Transfer for new parts; Supravision Network for bidirectional correction (Master Convert license)
Connection: Standard Ethernet
Special Hardware: None
Charges: Yes; contact UTE (423.282.0304)
VLB Control: VLB Industrial Control
Protocol: Supravision Network (see Communications with VLB Bender)
Connection: Standard Ethernet
Special Hardware: Contact VLB
Charges: Contact VLB
WAFIOS Control: WAFIOS
Protocol: MES files for correction
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown
Winton Machine Company Control: Winton
Protocol: VTube-LASER Winton File Data Transfer
Connection: Standard Ethernet
Special Hardware: None
Charges: None
YLM Control: YLM
Protocol: VTube-LASER YLM Supravision File
Connection: Standard Ethernet
Special Hardware: None
Charges: Unknown

 

 

 

bender communications

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  1. 01 VTube Communications with BendPro-controlled Benders
  2. 02 VTube Communications with STAR Technology Benders
  3. 03 VTube and SMI Bender Communications

Company

  • Product List
  • Free Software
  • Advanced Tubular Store

Resources

  • Clients
  • News
  • Store
  • Cart

Support

  • Contact
  • Support
  • Help Center
  • Privacy Policy

Follow Us

© 2026 Advanced Tubular Technologies. All rights reserved.

Knowledge Base Software powered by Helpjuice

Advanced Tubular Technologies
Expand